Available Now!!!
The Angle Guide We Always Wanted For Vevor and Toolcker Sharpeners
Here are recommendations for printing. Review these on your slicer and change if needed:
Wall loops Recommend 4
Detect thin walls-ON
Sparse inFill use Gyroid with Density 20%
or Cubic at 25% for Max Rigidity
I recommend PLA-CF or any filament that’s harder like PPACF or other Nylons but PLACF is the best overall for cost vs reward
I do not recommend standard PLA it has to much flex
LICENSE & USE WARNING
MY 3D files are provided for personal use only.
Commercial use is strictly prohibited.
You may NOT sell, resell, sublicense, or distribute these files or any physical parts made from them.
Retail use is not allowed.
Sale of this part is permitted only by ALXSHARPEN or by individuals or businesses who have received explicit written permission from ALXSHARPEN.
Unauthorized commercial use, reproduction, or sale of these files or printed parts is prohibited.
© ALXSHARPEN. All rights reserved.
FYI EVERYONE
These take me 14 hours to make full sets. I’m able to produce around 5-6 sets a day with my Two printers so please be patient as I know we have a pretty strong demand for them I will try to get them out as fast as I can.
LICENSE & USE WARNING
MY 3D files are provided for personal use only.
Commercial use is strictly prohibited.
You may NOT sell, resell, sublicense, or distribute these files or any physical parts made from them.
Retail use is not allowed.
Sale of this part is permitted only by ALXSHARPEN or by individuals or businesses who have received explicit written permission from ALXSHARPEN.
Unauthorized commercial use, reproduction, or sale of these files or printed parts is prohibited.
© ALXSHARPEN. All rights reserved.
SKINS FOR YOUR ANGLE GUIDES
I AM ONLY SHIPPING IN THE USA AT THIS TIME please do not order if outside the USA we will refund you if you order!
